{"product_id":"decal-install-kit","title":"Compliance Decal Installation Kit - Transfer Tape + Felt-Edge Applicator","description":"\u003cp\u003eChoose one of three fixed decal-installation bundles. Every tier shows the exact professional application-tape width and length, the supplied felt-edge installation applicator, and the additional preparation tools included before checkout.\u003c\/p\u003e\n\n\u003ch2\u003eChoose the bundle that matches your work\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEssential Install Kit - $24.99:\u003c\/strong\u003e 5 in x 10 ft (12.7 cm x 3.05 m) professional application tape, one 4 in (10 cm) felt-edge installation applicator, and a printed installation guide. Best for common 2-4 in lettering and smaller cut-vinyl graphics.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete Install Kit - $39.99:\u003c\/strong\u003e 12 in x 10 ft (30.5 cm x 3.05 m) professional application tape, one 4 in felt-edge installation applicator, surface-preparation wipes, and a printed installation guide. This is the most popular choice for wider graphics and a complete single-job setup.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContractor Install Kit - $64.99:\u003c\/strong\u003e 12 in x 25 ft (30.5 cm x 7.62 m) professional application tape, two 4 in felt-edge installation applicators, surface-preparation wipes, a measuring tape, and a printed installation guide. Best for repeat work, fleets, and multiple wide graphics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhen application tape is needed\u003c\/h2\u003e\n\u003cp\u003eProfessional application tape holds unmasked cut-vinyl lettering together while it moves from the release liner to the installation surface. A finished decal that already arrives premasked normally needs the felt-edge installation applicator, not a second layer of tape. Printed stickers and labels generally do not use application tape.\u003c\/p\u003e\n\n\u003ch2\u003eDry application method\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eConfirm that the decal film, adhesive and surface are suitable for dry application. Follow the instructions supplied with the decal when they differ.\u003c\/li\u003e\n  \u003cli\u003eClean and dry the smooth application area using a method approved for that substrate. Use the supplied surface-preparation wipes only on compatible surfaces. Measure the position and hold the graphic with a low-tack tape hinge.\u003c\/li\u003e\n  \u003cli\u003ePeel the release liner away from the graphic construction rather than pulling the graphic away from its liner.\u003c\/li\u003e\n  \u003cli\u003ePress with firm, short, overlapping strokes from the centre toward an edge, continuing past the graphic edge.\u003c\/li\u003e\n  \u003cli\u003ePeel the carrier tape back on itself at a low angle, close to 180 degrees. If vinyl lifts, lower the carrier and press the area again.\u003c\/li\u003e\n  \u003cli\u003ePress every edge again after carrier removal. A tiny persistent air pocket can be released at one edge with a pin; do not use a razor or knife.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eFit and limits\u003c\/h2\u003e\n\u003cp\u003eThe applicator is intended for smooth, clean, stable surfaces and pressure-sensitive vinyl graphics. Painted surfaces should be fully cured. Temperature, wet-versus-dry method and post-install wait time depend on the film, adhesive and substrate; this kit does not replace the instructions supplied with the graphic.\u003c\/p\u003e\n\n\u003ch2\u003eUse it across the compliance catalog\u003c\/h2\u003e\n\u003cp\u003eThe Essential bundle fits common \u003ca href=\"\/products\/cvor-decals-ontario\/\"\u003eCVOR and fleet lettering\u003c\/a\u003e, \u003ca href=\"\/products\/boat-registration-numbers\/\"\u003eboat registration numbers\u003c\/a\u003e and \u003ca href=\"\/products\/side-by-side-utv-registration-decals-ontario\/\"\u003eUTV ID decals\u003c\/a\u003e. Choose Complete for wider one-off graphics and Contractor for repeat work. Measure the finished graphic and confirm whether it is already premasked before choosing a tier.\u003c\/p\u003e","brand":"Compliance Lettering","offers":[{"title":"Essential Install Kit","offer_id":49078141911291,"sku":"CL-INSTALL-ESSENTIAL","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Complete Install Kit","offer_id":49078141944059,"sku":"CL-INSTALL-COMPLETE","price":39.99,"currency_code":"CAD","in_stock":true},{"title":"Contractor Install Kit","offer_id":49078141976827,"sku":"CL-INSTALL-CONTRACTOR","price":64.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0748\/9824\/3835\/files\/squeegee.jpg?v=1783495128","url":"https:\/\/checkout.niagarastandsout.ca\/products\/decal-install-kit","provider":"Niagara Stands Out ","version":"1.0","type":"link"}